溫馨提示：公司產品說明書下載地址//yunpan.cn/QE75nm6bbiLYP（復制到瀏覽器打開）

本公司專業經營助劑產品，以高端助劑品牌**、海名斯·德謙、道康寧、長昊助劑為主體。產品廣泛應用于涂料、油墨、紡織、洗滌、造紙、陶瓷、膠黏劑、石油化工等行業。其中分散劑系列在市場上得到了極優的好評。歡迎各位新老顧客咨詢洽談！

聯系電話：0757-26625082

旺旺：長昊助劑

公司地址：佛山市順德區容桂容奇大道美景大廈三樓33-36號.

樣品說明：本公司可免費提供所有產品樣品，如有需要，請聯系客服索取！

特點：高效廣譜持久殺菌，耐溫耐pH性好。

產品說明:

Nipacide BIT 20
Chemical name:1,2-Benzisothiazolin-3-one

Description:
Nipacide BIT 20 is a glycol based solution; low toxicity biocide developed for the
complete in-can protection of water based products. Nipacide BIT 20 is effective against
a wide range of microorganisms including gram positive and gram negative bacteria,
yeast and fungi. Microorganisms grow at a rapid rate and without use of the correct
biocide, numbers can increase dramatically.

Example of the numbers of bacteria able to grow in products if left unpreserved
？Time = 0 mins  1
？Time = 40 mins 4
？Time = 3 hrs     1024
？Time = 5 hrs     16,384
？Time = 7 hrs     1,048,576
？Time = 10 hrs   107,000,000,000
 
Time = 24 hrs
236,000,000,000,000,000,000,000

In-Can degradation in paints, polymer and adhesives as a result of bacterial and fungal
contamination, can result in:
 
？Loss of viscosity
？Gassing
？Discoloration
？Bad odors
？Product splitting
？Loss of adhesion
？Production clean down and production down time
？Loss of profit
 
Applications:
Nipacide BIT 20 is recommended for preservation of a wide range of applications
including water based, casein, animal bone based and PVA adhesives. Polymer emulsions
including, SBR latex, Polyvinyl acetate and acrylic. Water based decorative paints, metal
working fluids, Calcium Carbonate and Kaolin mineral slurries and concrete add-mixtures.
Nipacide BIT 20 is effective against a wide range of spoilage organisms and effective
over a wide pH and temperature range. Nipacide BIT 20 should be the biocide of choice
for products with pH >8 and production temperatures of >40 C.

Use level:

Nipacide BIT2 0 should be evaluated in finished products at levels between 0.1% and
0.25%. Please note that Nipacide BIT 20 above 0.25% requires R43 (causes
sensitization by skin contact) hazard labeling.

Microbiological data:
Nipacide BIT 20 has a broad spectrum of activity which is demonstrated by the
following MIC data.
 

MIC Levels                       Organism                                            MIC (ppm)
                                              Bacteria                                             
                                              Pseudomonas aeruginosa              300
                                              Pseudomonas putida                      250
                                             Proteus vulgaris                               25
                                              Escherichia coli                                25
                                              Staphylococcus aureus                  25
                                             Fungi
                                              Aspergillus niger                             200
                                              Penicillium mineoluteum                 150
                                              Fusarium solani                                100
                                              Geotrichum candidum                      500
                                             Yeast
                                              Candida albicans                             100
 

STANDARD FIVE CHALLENGE TEST METHOD: Bacterial Challenge Test.
Samples Tested: Water based decorative coating

INOCULUM
The mixed Inoculum of bacteria used is as follows : -
Bacteria:
Pseudomonas vesicularis             Providentia rettgeri
Alcaligenes faecalis                       Flavobacterium odoratus
Enterobacter aerogenes
Escherichia coli

STANDARD FIVE CHALLENGE TEST METHOD: Fungal Challenge Test.
Samples Tested: Water based decorative coating

INOCULUM
The mixed Inoculum of fungi and yeast used is as follows : -
Fungi:
Fusarium solani
Geotrichum candidum
Aspergillus terreus
Yeast
Rhodotorula rubra
Saccharomyces cerevisiae

Chemical compatibility:

Nipacide BIT 20 is compatible wi th most raw materials used in the manufacture of
industrial products. Nipacide BIT20 compatibility should always be checked and
evaluated before use.

Clariant Technical Service:

Clariant technical service is available to assist customers in the determination of the
optimum use level of biocide required to fully protect their product. A dedicated team of
microbiologists are on **t all times to assist customers with technical enquiries
relating to product protection. Full microbiological efficacy testing is available.

Regulations and approvals:
FDA 21 CFR 175.105      Adhesives
FDA 21 CFR 176.170      Components of paperboard in contact with aqueous and fatty foods
FDA 21 CFR 176.180      Components of paper and paperboard in contact with dry food.
BfR XIV                            Plastic dispersions
BfR XXXVI                      Preservative for Paper and Board
 
Use biocides safely. Always read the label and product information before use

September 2009

All information is given in good faith but without warranty. Customers should ensure
that their use of the products comply with specific regulations in the relevant market